STEAM CONTROL VALVES

GL2 Type – Top Guided angle globe control valve
SIZE: from 1/2″ to 8″
CLASS: from ANSI 150# to ANSI 2500#
ENDS: SW, BW, Flanged
FLOW CHARACTERISTIC: Linear, Equal%, Quick opening (available for on-off service)
LEAK CLASS: from class IV to class VI (where available)
ACTUATION: pneumatic, hydraulic, electric, manual.
BODY: globe, straight way, single port. Cast or forged (small dimension if required)
BONNET: type: bolted or pressure seal. Standard or extended cryo or HT
PLUG: unbalanced, contoured, Metal to Metal or soft seal
SEAT: quick change
PACKING: PTFE or GRAPHITE based, low emission, live loading, double with lateral leak – off

GL3 Type – Cage Guided globe control valve
SIZE: from ½’’ to 24’’
CLASS: from ANSI 150# to ANSI 2500#
ENDS: SW, BW, Flanged
FLOW CHARACTERISTIC: Linear, Equal%,
TRIM TYPE: concentric cages:single, double, triple stage.
Low Noise and Anticavitation trim
More than 3 stages available concentric cages or disk stack construction
LEAK CLASS: from class IV to class VI (where available)
ACTUATION: pneumatic, hydraulic, electric, manual.
BODY: globe, straight way, single port. Cast or forged (small dimension if required)
BONNET: type: bolted or pressure seal. Standard or extended cryo or HT
PLUG: balanced or unbalanced, piloted plug for class V at high temperature
SEAT: quick change, Metal to Metal or soft seat
PACKING: PTFE or GRAPHITE based, low emission, live loading, double with lateral leak – off

AG2 Type – Top Guided angle globe control valve
SIZE: from ½’’ to 8’’
CLASS: from ANSI 150# to ANSI 2500#
ENDS: SW, BW, Flanged
FLOW CHARACTERISTIC: Linear, Equal%, Quick opening (available for on-off service)
TRIM TYPE: Side In – Bottom Out for FLASHING or EROSIVE service, sintered Tungsten Carbide trim and downstream diffuser protector available
LEAK CLASS: from class IV to class VI (where available)
ACTUATION: pneumatic, hydraulic, electric, manual.
BODY: globe, straight way, single port. Cast or forged (small dimension if required)
BONNET: type: bolted or pressure seal. Standard or extended cryo or HT
PLUG: unbalanced, contoured, Metal to Metal or soft seal SEAT: quick change
PACKING: PTFE or GRAPHITE based, low emission, live loading, double with lateral leak – off

AG3 Type – Cage Guided angle globe control valve
SIZE: from ½’’ to 24’’
CLASS: from ANSI 150# to ANSI 2500#
ENDS: SW, BW, Flanged
FLOW CHARACTERISTIC: Linear, Equal%,
TRIM TYPE: concentric cages:single, double, triple stage. Low Noise and Anticavitation trim Side in – bottom Out for FLASHING or EROSIVE service,
sintered Tungsten Carbide trim and downstream diffuser protector available More than 3 stages available concentric cages or disk stack construction
LEAK CLASS: from class IV to class VI (where available)
ACTUATION: pneumatic, hydraulic, electric, manual.
BODY: globe, angle way, single port. Cast or forged (small dimension if required) BONNET: type: bolted or pressure seal. Standard or extended cryo or HT
PLUG: balanced or unbalanced, piloted plug for class V at high temperature
SEAT: quick change, Metal to Metal or soft seat
PACKING: PTFE or GRAPHITE based, low emission, live loading, double with lateral leak – off

TW1 Type – Diverting type 3 way globe control valve
SIZE: from 1’’ to 12’’
CLASS: from ANSI 150# to ANSI 1500# (2500# up to 4’’)
ENDS: Flanged (SW, BW special construction on request)
FLOW CHARACTERISTIC: Linear
LEAK CLASS: class IV
ACTUATION: pneumatic, hydraulic, electric, manual.
BODY: globe, 3 way. Cast or forged (small dimension if required)
BONNET: type: bolted or pressure seal. Standard or extended cryo or HT
PLUG: unbalanced, with regulating drilled pattern
SEAT: quick change, Metal to Metal
PACKING: PTFE or GRAPHITE based, low emission, live loading, double with lateral leak – off

TW2 Type – Mixing type 3 way globe control valve
SIZE: from 1’’ to 12’’
CLASS: from ANSI 150# to ANSI 1500# (2500# up to 4’’)
ENDS: Flanged (SW, BW special construction on request)
FLOW CHARACTERISTIC: Linear
LEAK CLASS: class IV
ACTUATION: pneumatic, hydraulic, electric, manual.
BODY: globe, 3 way. Cast or forged (small dimension if required)
BONNET: type: bolted or pressure seal. Standard or extended cryo or HT
PLUG: unbalanced, with regulating drilled pattern
SEAT: quick change, Metal to Metal
PACKING: PTFE or GRAPHITE based, low emission, live loading, double with lateral leak – off